"COMPONENTS OF COMPUTER SYSTEM"
There are many
computer components which make possible to run a computer and perform a certain
task which they are as follows- Keyboard, Mouse, Monitor, Printer, Speaker,
RAM, Hard Disk and many more.
Power Switch
It is the switch button which is used to start the computer.
It is the switch button which is used to start the computer.
Reset Button
It is used to restart the computer system in case if during Run time you need any start.
CD/DVD ROM
Often called a CD-ROM drive, which is used to access optical disks like CD (Compact disk) and DVD (Digital Video disk). A computer is only as useful as the software that runs on it and as long as computer has been software delivers. First announced in 1984 as the result of collaboration between Sony and Philips.
Often called a CD-ROM drive, which is used to access optical disks like CD (Compact disk) and DVD (Digital Video disk). A computer is only as useful as the software that runs on it and as long as computer has been software delivers. First announced in 1984 as the result of collaboration between Sony and Philips.
Floppy Drive
This
drive is used to access floppy disks. A floppy disk (FDD), or floppy drive, a
hardware device that reads data storage information.It was invented
in 1967 by a team at IBM and was one of the first types of hardware storage
that could read/ write a portable device. FDDs are used for
reading and writing on removable floppy discs. Floppy disks are now outdated,
and have been replaced by other storage devices such as USB and network file
transfer.
Front USB port, Mic
& Headphone slot
These very slots are used to accept any USBs, Mic & Headphones. The slots of Mic & Headphone are called Jack slot. It is located at the front panel of the CPU cabinet.
Power Supply Socket
This slot is used to supply the power to the CPU. In this you connect a power cable through which the power is supplied to SMPS and that reaches to every part of the necessary component.
Keyboard Socket
This slot is used to connect the keyboard to the computer system.
Mouse Socket
This very slot is used to connect the mouse to the computer system.
Parallel Port
This is used to connect any parallel device to the computer system. This parallel device may be a printer or something similar.
Expansion Slots
These slots are to connect any extra device or interface with the computer system you want to connect. This is used to enhance the capability of a computer system in case if you connect any extra interface or feature.
See My Next Post On "CPU".
These very slots are used to accept any USBs, Mic & Headphones. The slots of Mic & Headphone are called Jack slot. It is located at the front panel of the CPU cabinet.
Indicator Light
It is the signal light which confirms that
system is still running and when you shut this down then it gets automatically
turn off.
Power Supply Socket
This slot is used to supply the power to the CPU. In this you connect a power cable through which the power is supplied to SMPS and that reaches to every part of the necessary component.
Keyboard Socket
This slot is used to connect the keyboard to the computer system.
Mouse Socket
This very slot is used to connect the mouse to the computer system.
Parallel Port
This is used to connect any parallel device to the computer system. This parallel device may be a printer or something similar.
VGA Port
In this simplest sense, a VGA (video Graphics Array)
port is a 15-pin,D- sub miniature style port usually located on the back or the
back of a desktop system. Users employ VGA ports to transfer analog video
signals from one machine to another using VGA cables. The arrangement of the 15
pins on the VGA port is in three groups of five pins, lined up horizontally.The port is the “female” version of the pair, meaning
it appears as a series of holes, while the cable is the “male” version with the
appropriate pins. VGA ports first appeared in 1987 and are analog components
capable of carrying red, green, blue, horizontal sync, and vertical sync(RGBHV)
video signals.
Rear USB Port
This is called USB 2.0 used to connect USBs to the
computer system like any electronic device with USB connector can be connected
to the computer system.
Mic & speaker jack slot
These slots are used to connect sound out
and Microphone to the computer system so that you can store the delivered sound
to the system and can retrieve or play the music or sound through Sound Out slot with the help of
speakers. You will need to insert the jack of those to the appropriate jack
slot.
Network slot
This slot used to connect to any network through the
Network cable.
IEEE 1394 (Fire Wire)
The IEEE 1394 interface is to a serial bus interface standard
high-speed communications and isochronous (A sequence of events) real-time data
transfer. It was named as Fire wire its developer Apple Inc. The 1394 interface
is computer to USB though USB has more market share.
Motherboard
This is the main computer of the computer system
where all electronic components integrated together and support to make
computer system run is situated and set there like RAM, ROM processor and many
more.
Fan
This is set inside and set the fan face to outside so that whatever
heat generated by the CPU may get colder.
Central Processing Unit
This is set inside the computer system
used to process the data information taken as input by the user.
RAM
This is a primary memory (volatile in nature) in the form of chip is
integrated with a slot motherboard.
ROM
This is Chip with BIOS information integrated with a slot in Motherboard.
This is non-volatile and contains BIOS information used in booting process.
Display Adapter Card (Graphics Card)
This is adapter card used to link Monitor
to CPU. Whatever task is being performed in the CPU can be viewed and displayed
to monitor with the help of this.
These slots are to connect any extra device or interface with the computer system you want to connect. This is used to enhance the capability of a computer system in case if you connect any extra interface or feature.
See My Next Post On "CPU".
No comments:
Post a Comment